Top 9 Ledger And Ledger Accessories UK – Ear Plugs

As an Amazon Associate I earn from qualifying purchases.

1. Ledger

#ad

Ledger Nano X Pod, On-The-go Protection for Your Nano X.

#ad
Ledger #ad - Discreetly Elegant. Protect your device: designed for long lasting protection, keep your Nano X scratch- free and in perfect condition. Travel-proof: your nano pod is portable and easily pocketable; Securely stash your Ledger Nano X but have it ready at your fingertips. Designed to keep up with your life: Keep up with your hectic city life, jet setting, or office meetings with ample protection and easy access.
BrandLedger #ad
ManufacturerLedger #ad
Weight0.12 kg (0.26 Pounds)

2. TOPENS

#ad

TOPENS M12 Remote Control Key Fobs for Automatic Swing Sliding Gate Opener Garage Door Opener 4-Button Wireless Transmitter 2-Pack Security Gate Controller with Keychain

#ad
TOPENS #ad - The 2 x 3v lithium button cell CR2025 batteries incl. We are quite sure that you will be super-impressed with HIGH QUALITY of our Swing Gate Opener. The advanced topens security code technology ensures the safety of the gate opener system. The m12 remote will operate a third-party gate opener whose control board accepts “Normally Open Dry Contact” signal for push button, and connects with our ERM12 receiver NOT incl.

Small & easy to take wherever you are. 8 m12 remote controls on its own, and up to 250 with the ERM12 External Receiver NOT incl. In addition, and program button C/D for regular operation without midway mode. The remote control is well built with a durable metal frame for long-lasting performance. Quick pairing makes it simple to add the remote to your gate opener system with the programming button on the control board.

Easy to program all the topens swing and sliding gate openers can be operated by the m12 remote. The erm12 can be powered by 9-24VDC from the control board or external power source. Smart design m12 gate remote provides excellent operation range of 20 meters. One topens gate opener can pair max. Outstanding customer service backed by a 12-month topens warranty, and free product return & exchange service within 30 days.
BrandTOPENS #ad
ManufacturerHangzhou Sanyuan Tools Co.,Ltd #ad
Height1 cm (0.39 Inches)
Length5.5 cm (2.17 Inches)
Weight0.1 kg (0.22 Pounds)
Width3 cm (1.18 Inches)

3. Fdit

#ad

Book Binding Screw Rivets 10 Sets Ledger Nails Bag Accessories Plane Screws Letter Small Brass Color Large 10 Sets Bag Worker Leathercraft Rivets 13x18mm

#ad
Fdit #ad - Screws and rivets are made of brass material, durable, strong, wear resistant, not easy to rust. Easy to bind and disassemble, reusable, good sealing, and exquisite workmanship.

Leather screw buttons: made of high quality leather and fine workmanship, durable and comfortable. Equipped with 10 sets of metal stud rivets, each set contains 1 rivet and 1 screw to meet different requirements. It is suitable for leather goods production, the texture is outstanding, home decoration and other fields to create a personalized trend. Easy to use, i shaped screws allow you to easily apply standard screwdrivers to improve efficiency.
BrandFdit #ad
ManufacturerFdit #ad
Part NumberFditrx34s1hyo8-11
ModelFditrx34s1hyo8-11

4. Abaodam

#ad

Abaodam 100 Sets Screw Diy Leather Decoration Purse Accessories Mechanic Accessories Stainless Steel Bolts Rivet Buttons Diy Leather Accessories Nail Rivet The Cross Ledger Pin

#ad
Abaodam #ad - Scrapbook screw: the screw post is suitable for holding and decorating document, scrapbooking, book, photo album, etc. Leather repair screws: these screws are made of carbon steel, resistance, plated surface to form a stable oxidation film, rust resistance. Easy to install and carry, small size and portable. Rivets bookbinding stud: beautiful appearance and sturdy, durable material. Binding screws: the product is made of carbon steel,, not easy to rust or corrode. Screws assorted kit: suitable for all kind of art and leather crafts and DIY clothes making.
BrandAbaodam #ad
ManufacturerAbaodam #ad
Height0.7 cm (0.28 Inches)
Length0.8 cm (0.31 Inches)
Weight0.2 kg (0.45 Pounds)
Width1.4 cm (0.55 Inches)
Part Number348BCEN754W40WJ05D
Model348BCEN754W40WJ05D

5. Flush Daddy

#ad

FLUSHDADDY T68 Bottom Entry Long Life Flush Daddy Fill Valve with 0.5-Inch Brass Thread

#ad
Flush Daddy #ad - The package width of the Product is 5. 9 centimeters. The package length of the Product is 9. 6 centimeters. Country of Origin : United Kingdom. The package height of the Product is 29. 4 centimeters.
BrandFlush Daddy #ad
ManufacturerMark Vitow Ltd #ad
Height29.4 cm (11.57 Inches)
Length9.6 cm (3.78 Inches)
Weight0.27 kg (0.6 Pounds)
Width5.9 cm (2.32 Inches)
Part NumberT68
ModelT68
Warranty1 year warranty.

6. Elektek

#ad

Made in UK, ElekTek Unswitched Lamp Holder B22 BC Bayonet Cap with Shade Ring 10mm/M10 x1 Threaded Bottom Entry, Antique Brass

#ad
Elektek #ad - When re-assembling ensure ceramic insert is aligned correctly in base & body alignment slots are aligned with ceramic insert. This 22mm bc bayonet connector lamp holder is intended primarily for attachment to a male 10mm or 1/2" threaded tube - Integrated hollow EARTH terminal, wires from the inside so no wires are visible externally.

Standard unswitched b22 22mm bc bayonet cap lamp holder with shade ring - suitable for bulbs up to 200W for SWITCHED B22 version, ElekTek Safety Switch available in separate listing. Internal locking screw mounted in a separate riveted & threaded base ensuring your lighting does not come apart with use beware of cheaper, pressed type bases that cannot carry a locking screw - loosen screw, thread onto existing threaded fitting and tighten locking screw before wiring.

Hand assembled - easy to separate for fitting: simply remove the thin upper shade ring by unscrewing anti-clocwise; hold base with the Earth terminal pinched between thumb and index finger and unscrew thicker lower ring by unscrewing anti-clockwise. Made in the UK. Maximum diameter 32mm, height 48mm - 10mm m10 or 1/2" 26tpi threaded entry, reducing to 7mm cable aperture.
BrandElektek #ad
ManufacturerBuy It Better #ad
Part NumberL009
ModelL009

7. Mobestech

#ad

Mobestech 10pcs Copper Rivets Rivet Press Spikes for Clothing Studs for Clothing Leather Rivet Kit Clothing Accessories Belt Screws Clip Boards Outfit Fabric Rivets Shoe Spikes Metal Ledger

#ad
Mobestech #ad - Rivet press: made from metal, ensuring enhanced durability, so the screws can be used for a longer time. Metal studs: with their excellent locking effect, these rivet screws effectively prevent loosening. Brass rivets: the installation process is quick and, guarantees secure locking without any risk of loosening. Belt screws: the screw post fasteners are available in different sizes to cater to different purposes. Spikes for clothing: screw post fasteners are a versatile fasteners and suitable for a wide range of applications.
BrandMobestech #ad
ManufacturerMobestech #ad
Height0.5 cm (0.2 Inches)
Length1.2 cm (0.47 Inches)
Weight11.34 kg (25 Pounds)
Width0.5 cm (0.2 Inches)
Part NumberVI14Q55LWDH3702ZR
ModelVI14Q55LWDH3702ZR

8. Baluue

#ad

Baluue 1 Set Screw Flat Head Binding Barrels Ornament Kits Leather Kit DIY Leather Accessories Home Hardwares DIY Leather Decoration Leather Repair Supplies Rivet Ledger Copper M5

#ad
Baluue #ad - Home hardwares-- this set comes with m5x6, m5x10, m5x20, M5x18, m5x12, m5x8, m5x15, M5x25 and M5x30 screws. Aluminum screw posts-- replace old or broken binding screw with a new one. Photo albums binding screws-- made of quality material for lasting use. Binding post screws-- bringing shine and style to your accessory or craft. Leather repair screw-- easy to bind and remove, just punch a 5mm hole and connect on both sides.
BrandBaluue #ad
ManufacturerBaluue #ad
Weight0.32 kg (0.72 Pounds)
Part NumberISAPD46C09NT8YJ18811
ModelISAPD46C09NT8YJ18811

9. The Metal Foundry

#ad

The Metal Foundry No Entry Metal Door Sign. Art Deco Style Home Decor Accessories Door Or Wall Brass Plaque. Handmade In England.

#ad
The Metal Foundry #ad - Includes hand polished brass fixings for wall or door mounting. Then this is the perfect item for you! with a no entry Art Deco door sign visitors will know that you do not intend for them to use that entrance and so will strive to find the correct entry point into your property.

Do you have an Entrance? Do you not want people to use it? Plaque and fixings are fully lacquered for maximum protection outside or inside so will not need re-polishing. Not a flimsy cheap piece of plastic or resin. Measures 18. 5cm 7¼" by 4. 5cm 1¾". Made from 99% recycled materials And Is Completely Recyclable And Plastic Free. Like all of our plaques this sign is handmade in our factory in Leicester using the ancient art of sand-moulding. So you are getting a proper Art Deco quality product to show off.
BrandThe Metal Foundry #ad
ManufacturerThe Metal Foundry #ad
Height1 cm (0.39 Inches)
Length18.5 cm (7.28 Inches)
Weight0.35 kg (0.77 Pounds)
Width4.5 cm (1.77 Inches)
Part NumberDPAD-185-B-NOENTRY