Top 10 Analog to Digital Converter UK – DIY & Tools

As an Amazon Associate I earn from qualifying purchases.

1. LiebeWH

#ad

FV-200HZ 10V Voltage Frequency Converters 0~200HZ to 0~10V Digital to Analog Signal Module 20HZ to 1V/100HZ to 5V/200HZ to 10V, Frequency to Voltage Converter Module

#ad
LiebeWH #ad - Usagethe digital to analog module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter. Advantagethe input pulse level of the fv conversion module 5/12/24V can be input directly without resistance, and the input time is short.

Good performancethis is an ideal voltage converter, professional and practical, cost-effective, and has premium working performance. The material has passed the safety inspection, has a precise design, you can use it with confidence. It should be used together with the ground wire. Quality assurancethe voltage frequency converters is made of high-quality materials, is durable and has a long service life.

Signal conversionthe analog signal module can realize signal conversion: converting 0~200hz digital signal into 0~10V analog signal, high conversion efficiency. Has a strong applicability. In order to prolong the life of the module, the input signal frequency should be maintained for more than 05 seconds.
BrandLiebeWH #ad
ManufacturerLiebeWH #ad
Height1.7 cm (0.67 Inches)
Length4.7 cm (1.85 Inches)
Weight0.04
Width4.5 cm (1.77 Inches)
Part NumberLiebeWH9dgvgi68no3397

2. Fyearfly

#ad

Analog Voltage to PWM Signal Converter, 0-10V Analog Input Voltage to 0-100% 1-3KHZ PWM Digital Signal Module for PWM Motor Speed Control Interface Circuit

#ad
Fyearfly #ad - Widely usethis pwm to analog converter module can be used in different places. Working rangepwm signal receiving frequency range: 1KHz ~ 3KHz, take the PWM signal input level range by short-circuiting, the power supply has reverse polarity protection function.

High performancethis pwm-to-voltage module can convert the digital pwm signal into an analog signal 0 ~ 10V. Easy to operatehis pwm-to-voltage is designed with embedded microcontroller technology, so it is easy to wire and operate, you can also fine-tune the potentiometer at ease. It can be used for industrial control panel PLC or other signal interface switching, just need to adjust the PWM duty cycle to regulate the output voltage to meet your different needs.

Easy mountingdesigned with suitable size, it can be used in different places, also designed with mount hole, makes it easy to be fixed by screws. The input digital signal of this moudle can be 5v or 24V level 0-100% PWM signal, and the Output analog signal can be 0-10v voltage or 0-5v voltage.
BrandFyearfly #ad
ManufacturerFyearfly #ad
Height0.79
Length1.77
Weight0.02 kg (0.04 Pounds)
Width1.77
Part NumberFictor951z4acnik

3. LiebeWH

#ad

Frequency Voltage Converter Charger Converters Battery Chargers Digital to Analog Signal Module 0~500hz to 0~10V DC F/V Converter Module

#ad
LiebeWH #ad - Practical: the module is stable and has great performance while using. Function: the module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter. Note: frequency voltage converter charger converters Battery Chargers Digital to Analog Signal Module 0~500hz to 0~10V DC F/V Converter Module. Signal conversion: the converter module is to convert 0~500hz digital signal into 0~10V analog signal. Durable: all parts of the converter module are well-selected of good durability and high quality.
BrandLiebeWH #ad
ManufacturerLiebeWH #ad
Height0.67
Length1.85
Weight0.03 kg (0.06 Pounds)
Width1.77
Part NumberLiebeWHrgu7okb4i32560

4. Rockyin

#ad

Bench power supply Rockyin Digital Voltage Module, 3.3V PWM Signal to 0-10V Voltage Converter D/A Digital-Analog PLC Module

#ad
Rockyin #ad - Product performance:default function is converting 0-10v into 0-100% 3KHZ PWM signal; output frequency can be set by adjusting potentiometer as needed. Two kinds signal: there are two kinds of pwm signal, pnp-pwm output and npn-PWM output.

Working principle: this pwm-to-voltage module can convert the digital pwm signal into an analog signal 0 ~ 10V. Wide application: this module is widely used for pwm motor speed control interface circuit, single chip or other industrial control board, PLC, instrumentation AD interface conversion, and other applications that need convert voltage to PWM signal. The pnp-pwm output is only 5v level, NPN-PWM output is 5V and 24V level.

The input digital signal of this moudle can be 5v or 24V level 0-100% PWM signal, and the Output analog signal can be 0-10v voltage or 0-5v voltage. Feature:this signal module can put 0-10khz frequency pulse signal into 0-10V Analog voltage signal, power input has anti-reverse connect function, safe to use. Pwm signal and voltage can be direct ratio or inverse ratio.
BrandRockyin #ad
ManufacturerRockyin #ad
Weight0.02 kg (0.04 Pounds)
Part Number04RK-29IN657

5. AAOTOKK

#ad

AOTOKK Passive Video/Audio Supply RJ45 to BNC Network Transceiver,with DC Socket, for 720 1080P 3MP 4MP 5MP 8MP full HD CCTV Security DVR Monitoring Camera System19cm/2-Pairs

#ad
AAOTOKK #ad - Compatible with cvi, monitor, tvi, cvbs and ahd passive video & audio & dc power connector balun devices, dvr card and recorder etc. Note: power voltage drop calculations: for 12v dc 1amp, 18v dc, cable distance should not exceed 90 feet/27 meters.

For longer distances, 16v dc, please use 14V DC, 20-48V DC . Note:rj45 video balun is not waterproof. Connectors 1: rj45 to bnc male dc male rca male jack, Connectors 2: RJ45 to BNC male DC female RCA male jack. Quantity:2-pairs size:length(7inch/19cm Material:plastic. Easy installation, fit for720p 960p 1080p 3mp 4mp 5mp 8mp cctv cameras, using the standard UTP CAT5e /CAT6 cable system and low voltage power supply.

Color: Black. For indoor use only. Make sure the rj45 for camera side and DVR side are the same standardsWrongfully mixing the colors may result in burning the camera and devices. Video transmission Via UTP CAT5/CAT6. Led indicate green light is working model, yellow light not working.
BrandAAOTOKK #ad
ManufacturerAAOTOKK #ad
Part NumberA-000019
ModelA-000019

6. Akozon

#ad

Spannungswandler 0-10khz+ Akozon Frequency to Voltage Converter, Frequency to Voltage 0-10Khz to 0-10V F/V Digital to Analog Converter Module for The PLC and The Frequency Converter

#ad
Akozon #ad - 100% authorized and of high quality. Input pulse level is 5v 12v 24v, which can be directly entered without serial resistor. This module is easy to wire and convenient to use.

The input signal frequency must maintain more than 05 seconds. Signal inputs with optical coupling isolation, which can ensure that the capability of anti-interfence. We tirelessly saw these goals and compensated our products, rights and prices. The frequency of the pulse signal 0HZ to 10KHZ converts into an analog voltage signal of 0-10V. If you have any questions about us, please contact us and we will serve you wholeheartedly. Suitable for the switching of the PLC and the frequency converter.
BrandAkozon #ad
ManufacturerAkozon #ad
Height0.39
Length3.54
Weight0.02 kg (0.05 Pounds)
Width3.15
Part NumberAkozonfozgrsugb4

7. Generic

#ad

Digital Voltmeter Ammeter Small Display 2 In 1 Multimeter Tester Single Phase 5035Va Analog To Digital Converters

#ad
Generic #ad - Summary of selling points: single phase meter, easy to carry and use. Save time and effort with this device. For led display: the red indicator shows the voltage and the green indicator shows the current.

Accuracy and for speed the efficiency of this single phase meter, offering accurate measurements with % accuracy and a fast time/s for speed. Connection: no supply needed! the wires of the meter directly to your testing object and instantly measure voltage and without any hassle. Easy connection: the meter can be directly connected to the tested object using the wires, allowing you to measure voltage and without the need for a supply. Not only can it be used as an ammeter, small design, selling description This product is a single phase meter with display function, but it is also a digital voltmeter. The for led display makes it easy to read the measurements.
BrandGeneric #ad
ManufacturerGeneric #ad
Height1.57
Length3.15
Width1.97
Part NumberGenericoe615g0idp
ModelGenericoe615g0idp

8. Powerlift

#ad

PWM Signal to Voltage Converter,1-3KHZ 0-10V PWM Signal to Voltage Converter Module Digital Analog Board

#ad
Powerlift #ad - 2. Input digital signal: can be 5V or 24V level 0-100% PWM signal. 4. Can be used for: industrial control panel PLC or other signal interface switching. 3. Output analog signal: can be 0-10v voltage or 0-5v voltage. 5. Convenient and simple:This module is easy to wire and convenient to use. 1. Conversion:pwm converts digital signals into analog signal 0 to 10V.
BrandPowerlift #ad
ManufacturerPowerlift #ad
Weight0.02 kg (0.04 Pounds)

9. GOWE

#ad

GOWE Digital to Analog Converter Headphone Amplifier Tube Headphone Ampliier

#ad
GOWE #ad - Sampling frequency: scope for 8 khz-can be up to 192 khz; input data word: 16 to 24 bits; optional digital low-pass filter; optional interface, industry standard external filter; hard wiring control or 3 line SPI MCU control one-inch was DAC_I the MCU control; fully differential voltage output balance output; Digital receiving chips: Low JITTER digital receiving chips WM8805:.

The transceiver comes with a built-in high-performance phase locked loop pll, and don't work on the low frenquency jitter, its inherent jitter cycle for 50 ps, WM8804 and WM8805 generated dithering degree can be neglected 50 ps RMS. The general s/pdif transceiver can only restrain the jitter of above 10 kHz, dither frequency for 100 Hz inhibition. The wolfson's lock loop technology makes wm8804 and WM8805 transceivers to lock and recover the low quality of data input signal and timing, even it is extremely weakening input signal. As a standard s/pdif connecting device, and thus can accept any audio source from the s/pdif signal, both the user and designers can't control the quality of a third party's S/PDIF input signals joins the system. Technical specifications: s/pdif digital inputs :bnc rca coaxial, 44.

1 khz - 96 khz display will show 44. 1 khz, 96 khz, or 192 khz; output voltage: rca non-balanced output: 2v rms per channel, usb standard usb audio device; output frequencies:16/24-bit, toslink optical, XLR balanced output: 2 x 2V RMS per channel; USB input: 16-bit / 48 KHz; Power Consumption: 10 VA; Fuse Rating: 1A ;. Decoder chip: use the same decoder chip as the british arcam flagship used:wolfsonmicro company's high performance decoder chip:wm8740DAC; The main properties of decoding chips are as follows: characteristics: 120 db SNR: " A "weighted, mono @ 48 kHz; 117 db SNR: " A "A weighted, stereo @ 48 kHz; 104 decibels total harmonic distortion: " A "weighted @ 48 kHz;.
BrandGOWE #ad
ManufacturerGowegroup #ad
Weight1 kg (2.2 Pounds)
Part NumberGWE-1011761

10. Estink

#ad

Frequency to Voltage 0-10KHz to 0-10V Converter Module F/V Digital to Analog Board for Switching PLC and VFD Inverter, Digital to Analog Converter Module

#ad
Estink #ad - The input signal frequency must maintain more than 05 seconds. The frequency of the pulse signal 0HZ to 10KHZ converts into an analog voltage signal of 0-10V.

Input pulse level is 5v 12v 24v, which can be directly entered without serial resistor. Suitable for the switching of the PLC and the frequency converter. Input pulse level is 5v 12v 24v, which can be directly entered without serial resistor. This module is easy to wire and convenient to use. Signal inputs with optical coupling isolation, which can ensure that the capability of anti-interfence. The input signal frequency must maintain more than 05 seconds.
BrandEstink #ad
ManufacturerEstink #ad
Height0.39
Length3.54
Weight0.02 kg (0.04 Pounds)
Width3.15
Part NumberEstinkmoez4av6ky